Four easiest ways to clean the dirt from your floor Tiles

As you all know that ceramic tiles are looking so beautiful when they are firstly installed, but over time the grout lines become visibly stained and dark and your floor tiles become dull. At that time grout cleaning is very difficult by DIY methods. Unlike hardwood floors, tile floors are durable, easy to install and available in an array of styles. As they don’t require as much maintenance as carpets do. However, if you want your tile floors looking like new for years, you should know how to clean them properly. So at that time you have to need professional grout cleaning services. Professional grout cleaning can easily cost hundreds of dollars if you have a large floor space. Sometimes we see that when tile floors get really dirty, at that time some of the homeowners use strong chemicals to clean their tiles. So at that time you have to avoid using strong chemicals that will degrade your tiles in the long run. Plus, who wants to spend hours kneeling on the floor just to scrub away stubborn stains? If you want to get rid from these problems at that time you have to learn how to clean your home tiles on a frequent basis.  Fortunately when there is heavy duty chemical cleaners then they are not the only solution to clean your tiles. At that time you can easily clean tiles with some eagerly DIY methods and make your maintenance practices more efficient. Fresh Cleaning Services provides same day Tile and Grout Cleaning Sydney

Ways to make your tiles efficient:-
  • The best option to clean your floor tiles by vacuum your tile floors at couple of times in a week. After a time there is sand and grit can dull and scratch the surface on your floor. Once you’ve removed the dirt, you’re ready to mop. Mix a mild detergent with hot water and apply with a rag. You also use sponge mop, it pushes dirty water into the grout and soils it. You have to use your vacuum or a cloth dusting broom to remove dirt and dust before adding water to your floors.

  • You have to use the mixture of vinegar with one gallon of warm water. Vinegar does not need to be rinsed and it should be very effective method to clean the tile grout. It is very effective method and it needs to be diluted before use. You should also use rubbing alcohol instead of vinegar on your tiles as a last resort, as frequent use may rob your tiles of their luster.    

  • For your tiles are suffered with juice stains then wash the tile surface with hot water and detergent, then blot with hydrogen peroxide. When there should be grease stains then wash with club soda and water, or a commercial floor cleaner. For ink stains, soak a cloth in diluted bleach and lay it on top of the stain. Rinse thoroughly when done.

  • You also use the mixture of half scouring powder and half warm water. After that it should be spread on the stubborn stain by using a clean cloth and let it sits on the tile for 5-10 minutes. After that you have to scrub the area with a soft brush and carefully rinse the tile with warm water. Repeat the process until you remove the stain.

1 comment:

  1. I have never used a cleaning service before, I saw the set up of your website with a break down of what you do for a end of lease cleaning, it gave me confidence that the job will be done thoroughly. Thanks! Regards,

    Bond cleaning Glebe
    End of lease cleaning Mascot
    Bond cleaning Mascot
    Carpet steam cleaning Sydney
    Carpet cleaning services
    Carpet cleaning sydney
    Carpet cleaning services Sydney
    Carpet cleaning service in sydney


Are You Sure Your Carpets are Safe for Babies?

No doubt carpets get stained instantly. Thus it’s impossible to clean them with DIY treatments. As you can remove the dark spots, but no on...